Cub Cadet PRO Z 960 S SurePath™
Features
Innovative Technology
PRO Z™ SurePath™ units are outfitted with GPS Auto Steer technology. Simply set the preliminary cut line, and the PRO Z SurePath units will perform straight cutting paths with an auto-zero-turn at the end of each pass with the touch of a button.
Unmatched Efficiency
Reduce striping overlap by upwards of 7 inches per pass and increase your efficiency and productivity by up to 12% when SurePath is engaged.*
Perfect Striping
Achieve consistent stripes, guided by GPS for the straight lines and accuracy. Combined with a triple-plated fabricated deck and an exclusive electric four-wheel steering system, experience stripes like you’ve never seen.
Specs
Engine
- Engine Brand - Kawasaki®
- Engine Model - FX Series
- Engine Model Number - 1000V
- Engine Displacement - 999cc
- Engine Output - 35HP
- Fuel Tank Capacity - Dual 7.45 gal. US (28.2 L)
- Cylinders - Twin
- Engine Start - Ignition Key
- Engine Oil Capacity - 2.0 qt. US (1.89 L)
- Lubrication - Fully pressurized
- Charging System - 15 amp regulated
- Fuel Gauge - Electronic
- Choke - Separate Choke
- Air Filter - High Density
- Oil Filter - Yes
- Fuel Delivery - Carburetor
Drive System
- Transmission - Parker HTG 16cc pump / 310cc wheel motor
- Forward Speed - 14 mph / 22.5 km/h
- Reverse Speed - 6 mph / 9.5 km/h
Cutting Deck
- Deck Cutting Width - 60 in
- Deck Material - fabricated 7ga. (.187”) steel shell
- Deck Engagement (PTO) - Warner PTO clutch (220 ft-lb) with Soft-Start
- Deck Construction - 7ga. top plate 7ga. bottom reinforcement ¼” rolled leading edge
- Spindle Construction - 8" sealed cast aluminum housing (maintenance-free)
- Blade(s) - 3 high-lift Marbain® blades / 18,500 fpm (approx.)
- Cutting Height Range - 1” to 5” in 1/4” increments
- Anti-Scalping - 2 front deck gauge wheels
- Deck Positions - Foot pedal with spring assist 16 Positions
Chassis
- Frame - Fully welded, full-length 3/8 x 5" laser cut steel
- Front Axle - 2" x 3" solid axle tube with ISO dampening suspension
- ROPS - 2" x 2" spring-latch tool-less foldable 3 position
- Bumper - 5/16" Thick Steel rear engine guard
- Rear Tow Hitch - Integrated with pre-drilled mounting points for attachments
- Yokes - 1/2" thick steel front yokes
Controls
- Brakes - Hand-operated lever with integrated hydro pump release lever
- Steering Control - High Performance Steering Wheel with electronic power steering & Foot-pedal Control
Comfort
- Seat Type - Cushion with seat belt
- Armrests - Padded arm rests
- Seat Suspension - High-back Air-Ride suspension with EVC cushion, ISO mounted base (lateral suspension)
- Seat Adjustment - Angle back adjust and lumbar support
Wheels
- Rear Tires - 26" x 12"-12"
- Front Tires - 16" x 6.5"-8"
- Tire Tread - Turf Tread
Dimensions
- Dimensions L/W/H - 88" L x 73" W x 75" H (ROPS up)
- Weight (approx.) - 1610 lbs.
Additional Specifications
- Hour Meter - Crew Boss
- Discharge Chute - High-density, impact-resistant rubber
- Cup Holder - Intergrated into Side Pod
- Model Number - 53FIHMAV050
Tech Package
- Joystick Control Handle - Engagement Indicator Lights for Cut Line Setting, RH/LH Auto Turning
- GPS / Tower Antenna - LED lights show Satellite Connection for Auto-Steer Engagement
- Overlap Cutting / Tracking - Dash Mounted Adjustable knob for Deck Cutting Overlap
Disclaimer
- Specifications Disclaimer
Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website. - Efficiency Disclaimer*SurePath efficiency and savings statistics are intended for illustrative purposes only. The efficiency and savings information presented is mathematically extrapolated from the measured overlap improvements between a Cub Cadet SurePath-equipped commercial zero-turn mower with a 72-inch cutting deck compared with an otherwise identically equipped Cub Cadet mower with traditional lap bar steering controls operated by a variety of professional landscapers in controlled conditions. The overlap improvements were measured by a third-party testing firm, which also extrapolated those results based on the commercial mowing industry norms and standards they identified. Actual results in the field will vary based on operator preferences, mowing conditions, terrain, site configurations and other factors
Accessories and Attachments
Chains for 26 x 12 x 12 Tires
Item#: 490-241-0052
PRO PCS 1900 Three Bag Collection System
Item#: 59A30060150
Pro-X Power-Assist Clam Shell Bagger
Item#: 59A30051150
Power-Assist Triple Bagger
Item#: 59A30047150
Caster Wheel Kit
Item#: 59A30018150
12 Volt Outlet Kit
Item#: 59B30021150
Ultra Traction Wheel Set - 26 X 12
Item#: 59A30057150
Electric Lift Kit
Item#: 59A30050150
Ultra Traction Wheel - 26 x 12
Item#: 634-05450
Light Kit
Item#: 59B30011150
Heavy Duty Lawn Striping Kit
Item#: 59C30052150
PRO PCS 1900 Fan-Assist Kit
Item#: 59A30063150
PRO PCS 1900 60-in Deck Mounting Kit
Item#: 59A30062150