Gehl VT320

Double tap to zoom

Vertical Lift VT320
Overall Operating Height - Fully Raised: 169 in
Overall length with bucket: 160 in
Overall width less bucket: 70 in
Gross Power (kW): 85 kW
Features
Are you going up against the most difficult challenges on farms and construction sites and need unmatched performance, strength, and durability? Then you need the VT320, our largest vertical lift Track Loader. A machine that’s tougher than any job you can throw at it, the VT320 features an 85 kW engine and 3,200 lbs. of rated operating capacity for powerful lift and torque. That means rough terrain and unpredictable environments won't stop you while you're lifting, loading, and unloading heavy-duty materials from point A to B. Engineered for superior serviceability, productivity, and comfort, this machine gives you the edge over whatever is coming your way on the job site while leaving you prepared for tomorrow. The VT320—it's the pinnacle of Track Loaders.
Specs
Capacities | Imperial |
Operating Weight | 11799 lbs |
Operating Capacity at 35% Tipping Load | 3201 lbs |
Operating Capacity At 50% Tipping Load | 4572 lbs |
Tipping capacity | 9145 lbs |
Weight and dimensions | |
Overall Operating Height - Fully Raised | 169 in |
Height to Hinge Pin - Fully Raised | 130 in |
Reach - Fully Raised | 40 in |
Dump angle at full height | 41 ° |
Dump Height - Fully Raised | 100 in |
Maximum Rollback Angle - Fully Raised | 90.30 ° |
Overall Height to Top of ROPS | 83 in |
Overall length with bucket | 160 in |
Overall Length without Bucket | 128 in |
Specified Height | 76 in |
Reach at Specified Height | 30 in |
Maximum Rollback Angle at Ground | 31 ° |
Carry Position | 8 in |
Maximum Rollback Angle at Carry Position | 31 ° |
Digging Position | 1 in |
Angle of Departure with STD Counterweight | 23.50 ° |
Ground clearance | 12 in |
Track gauge | 52 in |
Track Shoe Width | 18 in |
Crawler base | 62 in |
Overall width less bucket | 70 in |
Bucket Width | 84 in |
Clearance Radius - Front with Bucket | 98 in |
Clearance Circle - Rear | 74 in |
Track Type / Roller Type | Rubber / Steel |
Performances | |
Ground Speed - Single Speed | 5 mph |
Drawbar Pull/Tractive Effort | 12769 lbs |
Bucket Breakout - Tilt Cylinder | 9903 lbs |
Bucket Breakout - Lift Cylinder | 7491 lbs |
Engine | |
Engine brand | Deutz |
Engine model | TD 3.6 EPA Tier IV |
Motor Type | Axial Piston with planetary gear box reduction |
Gross Power (kW) / Gross Power | 85 kW / 2300 rpm |
Battery | 12 V |
Cold Cranking Amps at Temperature (CCA) | 1600 A |
Alternator - Voltage / Ampere | 14 V / 120 A |
Hydraulics | |
Standard flow - Auxiliary hydraulics | 29 US gpm |
Tank capacities | |
Hydraulic tank capacity | 10 US gal |
Fuel tank | 32 US gal |
Displacement / Number of cylinders | 0.95 US gal / 4 |
Contact Us
-
824 US-42
Ashland, OH 44805
419-289-3610 -
6080 Norwalk Rd.
Medina, OH 44256
330-725-4951 -
625 South Main St.
Wellington, OH 44090
440-647-3725
© Copyright 2025 | All Rights Reserved. Site by EquipmentLocator.com
Business Policies | Privacy | Terms | Sitemap