Honda WB20
WB20
- Get a Quote
- Send to a Friend
- Payment Calculator
-
Share
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Durable silicon carbide mechanical seal
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
4 vane high efficiency impeller
The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
Cast iron volute
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.
Large strainer
The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Engine | GX120 |
Displacement | 118cc |
Bore and stroke | 2.4" x 1.7" |
Compression Ratio | 8.5:1 |
Oil Alert | Std |
Pump type | Centrifugal, Self-priming |
Volute | Rigid Mounted Cast Iron |
Impeller | 4 Vane Cast Iron |
Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide |
Priming time | 110 sec @ 16.4 ft. |
Drive system | Direct |
Discharge capacity | 164 gal/min |
Suction port diameter | 2" NPT |
Discharge port diameter | 2" NPT |
Total head lift | 105 ft. |
Suction head lift | 25 ft. |
Maximum pressure | 45 psi |
Solids handling | N/A |
Dimensions (LxWxH) | 19.3" x 14.4" x 16.5" |
Dry weight | 44 lb. |
Fuel Capacity | 0.53 gal |
Run Time @ Max Discharge | 1.7 hr |
Strainer Part # | 78325-YG3-000 |
Contact Us
-
824 US-42
Ashland, OH 44805
419-289-3610 -
6080 Norwalk Rd.
Medina, OH 44256
330-725-4951 -
625 South Main St.
Wellington, OH 44090
440-647-3725
© Copyright 2024 | All Rights Reserved. Site by EquipmentLocator.com
Business Policies | Privacy | Terms | Sitemap