Honda WT20
WT20
- Get a Quote
- Send to a Friend
- Payment Calculator
-
Share
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Features
Heavy-duty 2" construction trash pump
Specially designed for job sites and applications where high volume trash water capacity is needed.
Easy starting Honda OHV commercial engine
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
185 gal./min capacity
Solid handling capability up to 13/16"
Heavy duty full frame protection
Protects the pump, while offering a convenient tie down location for transport.
Easy quick clean out port
The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
Replaceable stainless steel wear plate
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
Standard service tool
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
Durable silicon carbide mechanical seal
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
Cast iron volute and impeller
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Isolation mounted engine and pump
High performance mounts minimize vibration, keeping the pump from “walking” away or “burying” itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Unique conical shaped impeller
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
Protected by Honda Oil Alert®
Protects the pump by shutting the engine off when low oil is detected.
Large heavy duty metal strainer
The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
Engine | GX160 |
Displacement | 163 cc |
Bore and stroke | 2.7" x 1.8" |
Compression Ratio | 9.0:1 |
Oil Alert | Std |
Pump type | Trash Centrifugal Self-priming |
Volute | Rigid Mounted Cast Iron w/ Stainless Wear Plate |
Impeller | Conical Cast Iron |
Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide |
Priming time | 60 sec. @ 16.4 ft. |
Drive system | Direct |
Discharge capacity | 185 gal/min |
Suction port diameter | 2" |
Discharge port diameter | 2" |
Total head lift | 85 ft. |
Suction head lift | 26 ft. |
Maximum pressure | 37 psi |
Solids handling | 13/16 inches |
Dimensions (LxWxH) | 24.4" x 18.1" x 18.3" |
Dry weight | 104 lbs. |
Fuel Capacity | 0.82 gal |
Run Time @ Max Discharge | 1.5 hr |
Strainer Part # | 78325-YG0-003 |
Contact Us
-
824 US-42
Ashland, OH 44805
419-289-3610 -
6080 Norwalk Rd.
Medina, OH 44256
330-725-4951 -
625 South Main St.
Wellington, OH 44090
440-647-3725
© Copyright 2024 | All Rights Reserved. Site by EquipmentLocator.com
Business Policies | Privacy | Terms | Sitemap