Scag SFC30-7CV-S-CA
Features
MOW WITH EASE
FRONT SWIVEL CASTER WHEELS
Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.
FULLY FABRICATED AND WELDED STEEL CUTTER DECK
MILITARY-GRADE STEEL - DECK
Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.
FULLY FABRICATED AND WELDED STEEL FRAME
MILITARY-GRADE STEEL - FRAME
Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.
SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT
FINE-TUNED AND SIMPLE
Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.
OFFSET BLADE SET UP
SIMPLIFIED DECK DRIVE SYSTEM
An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
SCAG LEVEL QUALITY-OF-CUT
UNMATCHED PERFORMANCE
The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
OPERATOR CONTROL PANEL
ERGONOMIC CONTROLS
Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.
OVERSIZED ADJUSTABLE CONTROLS
ACHIEVE MAXIMUM COMFORT
Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.
DISCHARGE – MULCH – BAG
3-IN-1 VERSATILITY
The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag
POWERFUL TRANSMISSION & ENGINE COMBO
MAXIMUM POWER FOR TOUGH CUTS
The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.
Specs
ENGINE & DECK COMBINATION
| Model | Description |
| SFC30-7CV-S-CA | 30" fully fabricated steel cutter deck, Kohler 224CV engine – recoil-start engine, Swivel Front Caster (California) |
PRODUCT DIMENSIONS
| Product Dimensions | SFC30 | SFC30 Swivel |
| Length - Transport (handles in upright transport position) | 41" | 44" |
| Length - Minimum (handles in highest operating position) | 66" | 69" |
| Length - Max (handles in lowest operating position) | 73.5" | 76.5" |
| Tracking Width | 28.75" | 28.75" |
| Width (w/ discharge chute) | 36.75" | 36.75" |
| Width (w/ discharge block off plate) | 31.5" | 31.5" |
| Height - Lowest Operating | 36.75" | 36.75" |
| Height - Max Operating | 45.25" | 45.25" |
| Height - w/ Handle Bar in Storage Position | 57.5" | 57.5" |
| Operating Weight - Bagging | 220 lbs. | 233 lbs. |
| Operating Weight - Mulching | 214 lbs. | 227 lbs. |
| Operating Weight - Discharging | 213 lbs. | 226 lbs. |
SPECIFICATIONS
| Specification | SFC30 |
| General | |
| Total Fuel Capacity | 1 gallon (0.37 gallon capacity for California models) |
| Rear Tires | 10.5" x 3" rubber tire w/ glass-filled polypropylene wheel |
| Front Tires | 9” x 2.25” rubber tire w/ glass-filled polypropylene wheel |
| Drive System | |
| Drive System Type | GT MV 702 Transmission |
| Forward Ground Speed | Up to 4 mph |
| Parking Brake | Hand lever |
| Deck | |
| Cutting Widths | 30" |
| Type | Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup. |
| Cutting Height | 1.5" to 5" in .25" increments. |
| Blade Type | Optimized for maximum performance whether discharging, mulching or bagging |
| Deck Lift | Hand lever. Single-point adjustment. |
| Construction | 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts. |
| Spindles | Aluminum housing with sealed ball bearings. |
| Blade Engagement | Blade brake clutch allows operator to disengage cutter blades without shutting off the machine. |
| Discharge, Mulch, Bag | Standard |
| Bag Capacity | 2.5 Bushels |
Accessories and Attachments
Front Swivel Caster Wheels